Current Location:
Ethernet Base Sub Controller

Main Features:
- ARM 32-bit RISC CPU
- 10/100 base-T automatically check high speed communication terminal
- Support Modbus/TCP communication protocol, easy to integrate
- Support UDP event dealing function
- Can transmit 100M without any repeater
- Can remote configure through Ethernet
- Allow 8 PC visit at the same time
- 8 I/O slot can support128 point data monitor
- 1500VDC Ethernet communication isolation
- Build-in system auto-reposition watchdog
- Windows tool: I/O model configure and calibrate, network automatically
search data stream setup, present status monitoring and warning trigger.
- Provide ActiveX driver for user developing
Product OverviewSpecificationOrdering Information

Specification:

-   Processor:

    CPU: 32-bit RISC CPU

    I/O model capacity: 4 slot

    Memory: 4MB RAM 512KB Flash ROM

    Operating system: real-time OS

    Status display: power (3.3V, 5V),CPU, communication

                           (link, active, 10/100Mbps, TX, RX)

    CPU power consumption: 5.0W

    Reset switch : yes

-   Isolationprotection

    Ethernet Communication 1500VDC

    Communication power 3000VDC

    I/O model isolation3000VDC

-   Diagnosis

    Power up Self test : hardware andsoftware

-   Ethernet

    Interface:   10/100Base T

    Lead:   UTP, 5 or higher wire

    Bus connection: RJ45 model slot

    Communication protocol Modbus/TCPTCPUDPIPARP

    Data transmitting speed: Max100Mbps

    Max communicate distance: 100mwithout repeater

    Response time: less than 5ms

-   Mechanicalfeatures:

    Coating: ABS plastics, withinstall accessories

    Plug-in screw terminator: diameterof lead 0.05mm2   to 2.5mm2,1-12or 2-14to 22AWG

-   Serialnetwork:

    Interface:   RS-485

    Communication protocol: ModBus/RTU

    Max vertices: 32

    Baud rate:   115.2Kbps

-   Powerrequirement

    Unconditioned: +10-30VDC

    Over voltage protection andReverse power protection

-   Softwaresupport

    ActiveX Driver

    Windows tool: network setting, I/Oconfiguration and standard,   data stream, warning setting

    Modbus/TCP OPC Server

-   Environment:

    Operating temp –10℃~+70℃

    Storage temp –25℃~+85℃
-   Humidity: 5~95% non-condensing


R-9420

Ethernet (8 slots) distributed data acquisition controlsystem